Online Shopping

Call at 9am to 5pm +8801752078099

Cart

Your Cart is Empty

Back To Shop

Online Shopping

Cart

Your Cart is Empty

Back To Shop
Call at 9am to 5pm +8801752078099
For Sale

Glue Gun Stick Big (10pes)

145.0 ৳ 

10 peas

Condition:100% New with High Quality Material:Polyvinyl Acetate Adhesive and this poduct made by china .

কাঠ বা প্লাস্টিকের সরঞ্জাম সংযোগ বা জোড়া লাগানো, সার্কিট বোর্ড নির্দিষ্ট স্থানে শক্তভাবে বসানো
 আর্টিফিসিয়াল ফ্লাওয়ার, ক্রাফট প্রজেক্টস, ফার্নিচার ও কাঠের কাজের জন্য অতি প্রয়োজনীয় আঠা

In stock (can be backordered)

Consult the owner’s manual. Go over the owner’s manual for information about safely operating your glue gun. Take note of the different components of the glue gun and how they’re supposed to function. The instruction manual should be able to tell you whether your glue gun will begin heating up automatically or needs to be turned on and off, how long it typically takes to warm up, and what materials it’s recommended for.
  • Be sure to read through the safety warnings carefully to reduce the risk of accident or injury while using the glue gun.
  • Your manual should also specify exactly what size or type of glue stick you’ll need.
Inspect the glue gun for signs of damage. Before plugging in or using the glue gun, look over the body to check for cracking, splitting, chipping or any other indications of damage. Make sure you also take a look at the electrical cord to see if there’s any frayed or broken wires. It can be very dangerous to operate a glue under under these conditions.

  • Because of their electrical and heating elements, a malfunctioning glue gun can be extremely hazardous to use.                               Make sure the nozzle is free of old glue residue. There should be a clear path for the melted glue to emerge from the tip of the glue gun. If necessary,  with a piece of aluminum foil to take off dried glue, or use a toothpick to clean out the hole. Your glue gun should always be free of excess residue from past projects before each use.
    • Always make sure the glue gun is unplugged before handling or removing the nozzle.
    • Never use water to clean a glue gun. In the worst case scenario, you may simply have to wait until the glue gun warms up enough for the old stuck-on glue to drip off.
    • Load a glue stick into the back of the gun. Take a fresh glue stick and place one end into the circular opening in the back of the gun. Slide it in until it stops. If there is already a partially used glue stick in the gun, finish that stick before inserting a new one. Your glue gun does not need to be loaded with a new stick for each project.
      • Most glue sticks are uniformly sized and made to fit any glue gun model. Check the instructions or specifications of your glue gun when buying replacement glue sticks just to be on the safe side.
      • Plug the glue gun’s cord into an electrical outlet. Locate an electric outlet in the wall nearest to where you’ll be working on your project. Stick the glue gun’s electric cord into the socket. The glue gun’s heating element will automatically begin to warm the glue stick inside, so don’t touch the nozzle or leave the glue gun unattended once it has been plugged in. Ensure you’re your glue gun is upright in its stand to avoid accidents.

        1. Again, check the electrical cord for any signs of damage or deterioration before plugging it in. An cord in bad condition can present a possible fire risk.                                                                                                                                     PLEASE CONTACT OUR TEEM- FACEBOOK. YOUTUBE .TWEETER

 

Reviews

There are no reviews yet.

Be the first to review “Glue Gun Stick Big (10pes)”
For Sale

Coming Soon - Dismiss

Cart

Your Cart is Empty

Back To Shop